Yes, the Thomas Payne Euro RV Recliner Chair w/ Footrest, # 195-000061 will swivel a full 360 degrees. Please note the attached product review video that includes full measurements including visual display of product. view full answer...
The Thomas Payne Euro RV Recliner Chair w/ Footrest, # 195-000061 is not intended to be an outdoor product as this is an upholstered piece of furniture with internal foam components.
Please note the attached product review video. view full answer...
Lippert, who make the Thomas Payne line of furniture, does not offer specific instructions for installing the Replacement Heater Pad # 674864 that you referenced. Installing this heating pad requires more or less disassembling the couch cushions to access the pad, unplugging and removing the old heater and reversing the process to install everything.
If you also need the plug, that is available with part # 195-000113. view full answer...
You would not want to plug your Thomas Payne recliner directly into your control panel. The recliner is not fused so if there was a power surge you could fry the wiring running to the couch and all of the electrical components like the powered recline or heat/massage functions. You would need to use the Replacement Power Cord with Power Supply Box for Thomas Payne Seismic RV Power Reclining Sofas # 195-000111 as this power supply box will act as a fuse to handle any surges and take the... view full answer...
I spoke with my contact at Lippert who said that there is a notch in the side of the cup holder that you should be able to feel with your hand. Once you find it you will need to use a flathead screwdriver or a butter knife to pop it up. This will reveal 2 screws that you will need to take out before detaching the cup holder wiring from the arm.
She also said that when the massage function goes out this is typically something that is related to the control box. This is found under the chair... view full answer...
The back on the Thomas Payne Heritage Armless RV Recliner # 195-000107 is fairly easy to disassemble. You will just need to pull out the retaining clips on the back of the chair, and pull the back off.
Additionally, when disassembled, the bottom piece measures 26". view full answer...
I spoke with my contact at Lippert who said that there is a notch in the side of the cup holder that you should be able to feel with your hand. I attached a picture of where it is as well. Once you find it you will need to use a flathead screwdriver or a butter knife to pop it up. This will reveal 2 screws that you will need to take out before detaching the cup holder wiring from the arm.
She also said that when the massage function goes out this is typically something that is related... view full answer...
The warranty on all of the now discontinued Thomas Payne RV Swivel Glider RV Recliner w/ Heated Seats like the 195-000029, is 1 year from the date of purchase. If the chair is OEM in the RV then the warranty is 1 year from the date of the original purchase.
To test the heater unplug the red and black wires from the control box (located behind and under your recliner) and test for continuity using a multimeter like part # PTW1714. If you have continuity then that means the control box is... view full answer...
The 90" x 48" MORryde RV Cargo Sliding Tray # MR32FR actually can be pulled out from either side of the trailer like what you mentioned! There is a latch system on either end that needs to be released to be able to pull it towards you so the rollers will stop when they reach a certain spot and stay stationary until you need to move the other side.
Let me know if you have any other questions! view full answer...
Installing a brake controller in a Class A RV like your 2005 Monaco Signature can sometimes be a little tricky because there is no standard location for the brake controller wiring.
Typically we have found that there is no plug-in adapter for Class A RVs, but you can usually find a wiring harness under the driver seat that has the appropriate wires needed for installation.
For the Tekonsha Prodigy P3 # 90195 you will connect the White wire to Ground, the Black wire to 12V Power, the Blue... view full answer...
Yes, the Stromberg Carlson RV Exterior Ladder part # LA-401 can absolutely be cut down to fit the exact dimensions of your coach. The ladder comes in two pieces, a top portion and a bottom portion. The part of the ladder that gets trimmed is the downtube between the top and bottom portion. Basically, you will want to cut both or one side of the downtubes until you have the correct size, then insert the hinges and attach to the coach.
I unfortunately don't have any videos or write-ups... view full answer...
Go To Results